UF-Domestic-PP
The AquArya Ultrafiltration (UF) modules are made from high Strength, hollow fiber membranes that have excellent features and benefits:
• 0.03-0.15 µm nominal pore diameter for removal of Bacteria, viruses and particulates including colloids to protect downstream processes such as RO.
• PP polymeric hollow fibers for high strength and chemical resistance allow long membrane life.
• Outside In flow configuration for high tolerance to feed solids that help to have more flexible pretreatment process or reduce the need for pretreatment process.
• During the cross-flow and filtration, the higher flow rate can increase the filtration and resist the fouling of the membrane.
• During the chemical washing, you can submerge the membrane in the chemicals or circulated the chemicals in the module for hours.
• U-PVC housing, helping to eliminate the need for costly pressure vessels.
- Technical information for application
- Membrane technical information
- Input flow information
- Filtered flow information
|
Filtration Mode |
Filtration Mode |
Max. Work Pressure |
Max. TMP |
Pre-filtration |
Max. Temperature |
Flushing Mode |
Flushing Pressure |
|
Cross Flow/ Dead End |
Outside to Inside |
0.35Mpa |
2 bar |
≤50μm Micro-Filtration |
45℃ |
Water/Air-water/Chemical |
Max.0.30Mpa |
Cl disinfection : 200 ppm for short time
H2O2 disinfection : 2000 ppm for short time
|
Materials |
Inner Diameter |
Pore Size |
Pore Density |
X-axis strength |
Shape |
Out Diameter |
Thickness |
|
Polypropylene (PP) |
250～300μm |
0.03～0.15μm |
40%～50% |
120Mpa |
Hollow Fiber |
350～400μm |
40～50μm |
|
Temperature |
Inlet pH |
Oil & Grease |
TSS |
Particle Size |
Turbidity |
Inlet COD |
Continuous Cl2 |
|
℃ 40-4 |
2-12 |
mg/l <2 |
mg/l <100 |
300> µm |
300> NTU |
60>ppm |
100ppm |
|
SDI of Filtrate |
Output Pathogens |
Bacteria & Microbe Removal |
Turbidity of Filtrate |
|
>3 |
Four Log Reduction |
<99%/99 |
> 0.1NTU |
| Specification | Description | Specification | Description | Specification | Description |
| Fiber material | Polypropylene | Temperature | 4-40 ℃ | Weight | 1 kg |
| Flow Range | 24 lit/h; | pH | 12-2 | Length | 25 cm |
| Max. TMP | 2 bar | Membrane Area | 2 m2 | Diameter | 5 cm |
